Datasheet

 2011-2014 Microchip Technology Inc. DS70000652F-page 299
dsPIC33FJ16(GP/MC)101/102 AND dsPIC33FJ32(GP/MC)101/102/104
FIGURE 26-5: TIMER1/2/3 EXTERNAL CLOCK TIMING CHARACTERISTICS
Note: Refer to Figure 26-1 for load conditions.
Tx11
Tx15
Tx10
Tx20
TMRx
OS60
TxCK
TABLE 26-22: TIMER1 EXTERNAL CLOCK TIMING REQUIREMENTS
(1)
AC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C  T
A  +85°C for Industrial
-40°C  T
A  +125°C for Extended
Param
No.
Symbol Characteristic
(2)
Min Typ Max Units Conditions
TA10 T
TXH T1CK High
Time
Synchronous
mode
Greater of:
20 or
(TCY + 20)/N
— — ns Must also meet
Parameter TA15,
N = prescale value
(1, 8, 64, 256)
Asynchronous 35 — — ns
TA11 TTXL T1CK Low
Time
Synchronous
mode
Greater of:
20 ns or
(TCY + 20)/N
— — ns Must also meet
Parameter TA15,
N = prescale value
(1, 8, 64, 256)
Asynchronous 10 — — ns
TA15 T
TXP T1CK Input
Period
Synchronous
mode
Greater of:
40 or
(2 T
CY + 40)/N
— — ns N = prescale value
(1, 8, 64, 256)
OS60 Ft1 SOSC1/T1CK Oscillator
Input Frequency Range
(oscillator enabled by setting
the TCS (T1CON<1>) bit)
DC — 50 kHz
TA20 T
CKEXTMRL Delay from External T1CK
Clock Edge to Timer Increment
0.75 TCY + 40 — 1.75 TCY + 40 ns
Note 1: Timer1 is a Type A.
2: These parameters are characterized by similarity, but are not tested in manufacturing.