Datasheet

 2011 Microchip Technology Inc. DS22288A-page 35
MCP2210
FIGURE 3-12: GET (VM) SPI TRANSFER SETTINGS LOGIC FLOW
13 Chip Select to Data Delay (quanta of 100 µs) – 16-bit value (high byte)
Example
: If we have 500 µs delay between the CS being asserted and the first byte of data, the value
will be 0x0005.
- This byte position will have a value of: 0x00
14
Last Data Byte to CS (de-asserted) Delay (quanta of 100 µs) – 16-bit value (low byte)
Example
: If we have 500 µs delay between the last data byte sent and the CS being de-asserted, the
value will be 0x0005.
- This byte position will have a value of: 0x05
15
Last Data Byte to CS (de-asserted) Delay (quanta of 100 µs) – 16-bit value (high byte)
Example
: If we have 500 µs delay between the last data byte sent and the CS being de-asserted, the
value will be 0x0005.
- This byte position will have a value of: 0x00
16 Delay Between Subsequent Data Bytes (quanta of 100 µs) – 16-bit value (low byte)
Example
: If we have 500 µs delay between two consecutive data bytes, the value will be 0x0005.
- This byte position will have a value of: 0x05
17 Delay Between Subsequent Data Bytes (quanta of 100 µs) – 16-bit value (high byte)
Example
: If we have 500 µs delay between two consecutive data bytes, the value will be 0x0005.
- This byte position will have a value of: 0x00
18 Bytes to Transfer per SPI Transaction – 16-bit value (low byte)
Example
: If an SPI transaction of 1250 bytes long is required, the corresponding hex value
will be 0x04E2.
- This byte position will have a value of: 0xE2
19 Bytes to Transfer per SPI Transaction – 16-bit value (high byte)
Example: If an SPI transaction of 1250 bytes long is required, the corresponding hex value
will be 0x04E2.
- This byte position will have a value of: 0x04
20 SPI Mode
• 0x00 – SPI mode 0
• 0x01 – SPI mode 1
• 0x02 – SPI mode 2
• 0x03 – SPI mode 3
21 - 63 Don’t Care
TABLE 3-34: RESPONSE 1 STRUCTURE
Byte
Index
Meaning
Get RAM SPI
Transfer Settings
Response 1
RAM SPI
Transfer Settings
Retrieved