Datasheet

MCP2210
DS22288A-page 62  2011 Microchip Technology Inc.
4.0 ELECTRICAL CHARACTERISTICS
Absolute Maximum Ratings
(†)
Ambient temperature under bias.........................................................................................................-40°C to +85°C
Storage temperature ........................................................................................................................ -65°C to +150°C
Voltage on V
DD with respect to VSS ................................................................................................... -0.3V to +6.0V
Voltage on MCLR
with respect to Vss ................................................................................................. -0.3V to +9.0V
Voltage on V
USB pin with respect to VSS ............................................................................................ -0.3V to +4.0V
Voltage on D+ and D- pins with respect to V
SS ...................................................................... -0.3V to (VUSB + 0.3V)
Voltage on all other pins with respect to V
SS ............................................................................ -0.3V to (VDD + 0.3V)
Total power dissipation
(1)
...............................................................................................................................800 mW
Maximum current out of V
SS pin ...................................................................................................................... 95 mA
Maximum current into V
DD pin ......................................................................................................................... 95mA
Clamp current, I
K (VPIN < 0 or VPIN > VDD)20 mA
Maximum output current sunk by any I/O pin....................................................................................................25 mA
Maximum output current sourced by any I/O pin...............................................................................................25 mA
Maximum current sunk by all ports....................................................................................................................90 mA
Maximum current sourced by all ports ............................................................................................................. 90 mA
Note 1: Power dissipation is calculated as follows: P
DIS = VDD x {IDD –  IOH} +  {(VDD – VOH) x IOH} + (VOl x IOL).
2: VUSB must always be  VDD + 0.3V
† NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the
device. This is a stress rating only and functional operation of the device at those or any other conditions above those
indicated in the operation listings of this specification is not implied. Exposure above maximum rating conditions for
extended periods may affect device reliability.