Datasheet

MCP23008/MCP23S08

18-Lead Plastic Small Outline (SO) – Wide, 7.50 mm Body [SOIC]

Notes:

1. Pin 1 visual index feature may vary, but must be located within the hatched area.

2. § Significant Characteristic.

3. Dimensions D and E1 do not include mold flash or protrusions. Mold flash or protrusions shall not exceed 0.15 mm per side.

4. Dimensioning and tolerancing per ASME Y14.5M.

BSC: Basic Dimension. Theoretically exact value shown without tolerances.

REF: Reference Dimension, usually without tolerance, for information purposes only.

Note: For the most current package drawings, please see the Microchip Packaging Specification located at

http://www.microchip.com/packaging

Units MILLIMETERS

Dimension Limits MIN NOM MAX

Number of Pins N 18

Pitch e 1.27 BSC

Overall Height A – – 2.65

Molded Package Thickness A2 2.05 – –

Standoff § A1 0.10 – 0.30

Overall Width E 10.30 BSC

Molded Package Width E1 7.50 BSC

Overall Length D 11.55 BSC

Chamfer (optional) h 0.25 – 0.75

Foot Length L 0.40 – 1.27

Footprint L1 1.40 REF

Foot Angle φ 0° – 8°

Lead Thickness c 0.20 – 0.33

Lead Width b 0.31 – 0.51

Mold Draft Angle Top α 5° – 15°

Mold Draft Angle Bottom β 5° – 15°

NOTE 1

2 3

Microchip Technology Drawing C04-051B