Regulatory Compliance Information WFI32E01 Module Regulatory Compliance Information Revision 0.0 June’ 2020 Revision 0.
Regulatory Compliance Information This document covers the Regulatory Compliance information which will be part of the WFI32E01 Module datasheet and related documents shared with customers. 1.1 Antenna Considerations: Table 1-1 provides the list of Approved antennas along with the manufacturer and part number details. Slno. P/N Vendor 1 RFA-02-L2H1 Alead/ Aristotle 2 RFA-02-C2H1-D034 Alead/ Aristotle 3 RFA-02-D3 4 Antenna Gain @ 2.
Regulatory Compliance Information 1.2 WFI32E01 Usage Instructions under Modular Approval Table 1-2: Features and supported modes of operation Frequency Range Wi-Fi: 2.400 GHz ~ 2.4835 GHz (2.4 GHz ISM Band) Number of Channels Wi-Fi: 11 for North America The availability of some specific channels and/or operational frequency bands are country dependent and should be programmed at the Host product factory to match the intended destination. Regulatory bodies prohibit exposing the settings to the end user.
Regulatory Compliance Information 2.1 United States The WFI32E01 modules have received Federal Communications Commission (FCC) CFR47 Telecommunications, Part 15 Subpart C “Intentional Radiators” single-modular approval in accordance with Part 15.212 Modular Transmitter approval. Single modular transmitter approval is defined as a complete RF transmission sub-assembly, designed to be incorporated into another device, that must demonstrate compliance with FCC rules and policies independent of any host.
Regulatory Compliance Information • Consult the dealer or an experienced radio/TV technician for help Additional information on labeling and user information requirements for Part 15 devices can be found in KDB Publication 784748, which is available at the FCC Office of Engineering and Technology (OET) Laboratory Division Knowledge Database (KDB) https://apps.fcc.gov/oetcf/kdb/index.cfm 2.1.2 RF Exposure All transmitters regulated by FCC must comply with RF exposure requirements.
Regulatory Compliance Information 3.1 Canada The WFI32E01 module has been certified for use in Canada under Innovation, Science and Economic Development Canada (ISED, formerly Industry Canada) Radio Standards Procedure (RSP) RSP-100, Radio Standards Specifi- cation (RSS) RSS-Gen and RSS-247. Modular approval permits the installation of a module in a host device without the need to recertify the device. 3.1.
Regulatory Compliance Information Immediately following the above notice, the manufacturer shall provide a list of all antenna types approved for use with the transmitter, indicating the maximum permissible antenna gain (in dBi) and required impedance for each. 3.1.2 RF Exposure All transmitters regulated by ISED must comply with RF exposure requirements listed in RSS-102 - Radio Frequency (RF) Exposure Compliance of Radio communication Apparatus (All Frequency Bands).