User Guide

1LSb OCTAL DAC
EVALUATION BOARD
USER’S GUIDE
 2021 Microchip Technology Inc. and its subsidiaries DS50003218A-page 5
Preface
INTRODUCTION
This chapter contains general information that will be useful to know before using the
1LSb Octal DAC Evaluation Board. Items discussed in this chapter include:
•
Document Layout
• Conventions Used in this Guide
• Recommended Reading
• The Microchip Website
• Customer Support
• Document Revision History
DOCUMENT LAYOUT
This document describes how to use the 1LSb Octal DAC Evaluation Board to demon-
strate the performance of the MCP47CXBX8/MCP48CXBX8 DAC family. The manual
layout is as follows:
•
Chapter 1. “Product Overview” – Provides quick, step-by-step information on
setting up the 1LSb Octal DAC Evaluation Board.
•
Chapter 2. “Installation and Operation” – Important information about the 1LSb
Octal DAC Evaluation Board.
•
Chapter 3. “Code” – Includes instructions on how to get started with the 1LSb
Octal DAC Evaluation Board.
•
Appendix A. “Schematics” – Refer to the board’s web page for the complete
Schematics.
•
Appendix B. “Bill of Materials (BOM)” – Refer to the board’s web page for the
complete Bill of Materials.
NOTICE TO CUSTOMERS
All documentation becomes dated, and this manual is no exception. Microchip tools and
documentation are constantly evolving to meet customer needs, so some actual dialogs
and/or tool descriptions may differ from those in this document. Please refer to our website
(
www.microchip.com) to obtain the latest documentation available.
Documents are identified with a “DS” number. This number is located on the bottom of each
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXXXXA”, where “XXXXXXXX” is the document number and “A” is the revision level
of the document.
For the most up-to-date information on development tools, see the MPLAB
®
IDE online help.
Select the Help menu, and then Topics to open a list of available online help files.