Owner's Manual
Table Of Contents
- Notice to Development Tools Customers
- Table of Contents
- 1. Compiler Advisor
- The Microchip Website
- Product Change Notification Service
- Customer Support
- Product Identification System
- Microchip Devices Code Protection Feature
- Legal Notice
- Trademarks
- Quality Management System
- Worldwide Sales and Service
...........continued
Menu Item Description
Auto Range Automatically adjust the range of the selected axes for the data in the chart.
1.2.5 View Initial Configuration
To view the initial project configuration used, click on “Properties” to open the Project Properties window.
1.2.6 Save Configuration to Project
Click on the “Save Config” link under a configuration (e.g., Config E) that you want to add to your project. This will
open the Save Configuration to Project dialog (see figure below). If you want this to be the active configuration in the
project, check the checkbox. Then click OK.
Figure 1-10. Save Configuration to Project
To open the Project Properties to see the added configuration, click the link in the Output window.
Figure 1-11. Open Project Properties from Output Window
The configuration is now added to the project. If the configuration was made active, it will also appear in the toolbar
drop-down list.
Compiler Advisor
© 2021 Microchip Technology Inc.
and its subsidiaries
User Guide
DS-50003215A-page 9