User's Manual
Table Of Contents
- Intended Use
- Prior to Installation
- Installation
- Child Safety
- During Use
- Maintenance and Cleaning
- Servicing
- Disposing of the FROSTMED
- Handling of CO2
- CO2 Canister Transportation
- CO2Temperature
- CO2 Pressure
- CO2 Refilling Process
- CO2 Canister Storage and Transportation (empty/full)
- In the very rare case of a frostbite
- IC and FCC Compliance
- This device complies with Industry Canada license-exempt RSS standard(s). This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device...
- FCC/ISED RF exposure
- This equipment complies with FCC radiation exposure limits and Canada radiation RF exposure limits set forth in CFR 47 Sections 2.1091 and Industry Canada RSS-102 for an uncontrolled environment. This equipment should be installed and operated with a ...
- FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
- Digital class B notice
- NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential insta...
- • Reorient or relocate the receiving antenna.
- • Increase the separation between the equipment and receiver.
- • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- • Consult the dealer or an experienced radio/TV technician for help.
- FDA clearance
- FROSTMED devices (PRO G1, PRO G2, LITE G1, LITE G2, LITE CV G1 and LITE CV G2 models) are
- FDA-cleared as Class II device, 510(K) exempts.
- 1. Introduction
- 2. Starting FROSTMED PRO, LITE, LITE CV
- 3. Operating FROSTMED
- 4. Removing Empty CO2 Canisters
- 5. Alert Programming and Notification
- 6. Troubleshoot
- 7. Service and Spare Parts
- 8. Customer Service Department
- Informations importantes relatives à la sécurité
- Utilisation prévue
- Avant l’installation
- Installation
- Sécurité des enfants
- Pendant l’utilisation
- Entretien et nettoyage
- Réparations
- Élimination de FROSTMED
- Manipulation du CO2
- Transport des cartouches de CO2
- Température du CO2
- Pression du CO2
- Processus de remplissage des cartouches de CO2
- Stockage et transport des cartouches de CO2 (vides/pleines)
- Dans les très rares cas d’engelures
- Conformité
- Informations importantes relatives à la sécurité
- 1. Introduction
- 2. Commencer à utiliser FROSTMED PRO, LITE, LITE CV
- 3. Fonctionnement de FROSTMED
- 4. Retrait des cartouches de CO2 vides
- 5. Programmation et notification des alertes
- 6. Dépannage
- 7. Réparation et pièces de rechange
- 8. Service client
Installation
•
Care should be taken when moving FROSTMED.
•
It is dangerous to alter the specifications or attempt to modify this product in any way.
•
All Canisters should be secure before turning FROSTMED on.
•
FROSTMED should be placed flat on the bottom of the given cooler and/or ice chest that it is
placed in.
Child Safety
Do not allow children to use the Bluetooth app that controls FROSTMED unless under adult
supervision!
During Use
•
Do not place ICE inside the cooler when using FROSTMED.
•
Containers with flammable gases or liquids can leak at low temperatures. Do not store any
containers holding flammable materials, such as spray cans, fire extinguisher refill cartridges
etc. with FROSTMED.
•
Never submerge FROSTMED.
Maintenance and Cleaning
•
Before cleaning, always switch off FROSTMED.
•
Wipe all surfaces with an antimicrobial solution (isopropyl alcohol) and a cotton swab.
Servicing
•
This product should be serviced by an authorized engineer and only genuine spare parts should
be used.
•
Under no circumstances should you attempt to repair FROSTMED by yourself. Repairs carried
out by inexperienced persons may cause injury or serious malfunctioning.
Disposing of the FROSTMED
When disposing your FROSTMED, use an authorized disposal site. Check with your local Council
or Environmental Health Office to see if there are facilities in your area to recycle FROSTMED.
Handling of CO
2
CO
2
should be handled in accordance with the guidelines and restrictions outlined in this manual
to ensure safe use.