User's Manual
Table Of Contents
- Intended Use
- Prior to Installation
- Installation
- Child Safety
- During Use
- Maintenance and Cleaning
- Servicing
- Disposing of the FROSTMED
- Handling of CO2
- CO2 Canister Transportation
- CO2Temperature
- CO2 Pressure
- CO2 Refilling Process
- CO2 Canister Storage and Transportation (empty/full)
- In the very rare case of a frostbite
- IC and FCC Compliance
- This device complies with Industry Canada license-exempt RSS standard(s). This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device...
- FCC/ISED RF exposure
- This equipment complies with FCC radiation exposure limits and Canada radiation RF exposure limits set forth in CFR 47 Sections 2.1091 and Industry Canada RSS-102 for an uncontrolled environment. This equipment should be installed and operated with a ...
- FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
- Digital class B notice
- NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential insta...
- • Reorient or relocate the receiving antenna.
- • Increase the separation between the equipment and receiver.
- • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- • Consult the dealer or an experienced radio/TV technician for help.
- FDA clearance
- FROSTMED devices (PRO G1, PRO G2, LITE G1, LITE G2, LITE CV G1 and LITE CV G2 models) are
- FDA-cleared as Class II device, 510(K) exempts.
- 1. Introduction
- 2. Starting FROSTMED PRO, LITE, LITE CV
- 3. Operating FROSTMED
- 4. Removing Empty CO2 Canisters
- 5. Alert Programming and Notification
- 6. Troubleshoot
- 7. Service and Spare Parts
- 8. Customer Service Department
- Informations importantes relatives à la sécurité
- Utilisation prévue
- Avant l’installation
- Installation
- Sécurité des enfants
- Pendant l’utilisation
- Entretien et nettoyage
- Réparations
- Élimination de FROSTMED
- Manipulation du CO2
- Transport des cartouches de CO2
- Température du CO2
- Pression du CO2
- Processus de remplissage des cartouches de CO2
- Stockage et transport des cartouches de CO2 (vides/pleines)
- Dans les très rares cas d’engelures
- Conformité
- Informations importantes relatives à la sécurité
- 1. Introduction
- 2. Commencer à utiliser FROSTMED PRO, LITE, LITE CV
- 3. Fonctionnement de FROSTMED
- 4. Retrait des cartouches de CO2 vides
- 5. Programmation et notification des alertes
- 6. Dépannage
- 7. Réparation et pièces de rechange
- 8. Service client
1.
Introduction
Congratulations on the purchase of your new FROSTMED portable cooling system!
FROSTMED is an innovative cooling product that uses liquid Carbon Dioxide (CO
2
) to maintain a low
temperature inside your insulated container. The FROSTMED's cooling ability is based on the
principle that when liquid CO
2
(compressed CO
2
) is released into the atmosphere it absorbs a
large amount of heat from the surrounding items which become very cold.
FROSTMED is the ideal source of cold when you transport vaccines, medicine, specimens, blood
products, beverage, foods and any temperature sensitive items.
You can monitor and control the temperature inside the insulated container in real-time using
the FROSTMED smartphone app (available for G1 and G2 models) or using the FROSTMED web
application (only available for G2 models).
Thank you from everyone on FROSTMED team!
2.
Starting FROSTMED PRO, LITE, LITE CV
2.1
FROSTMED Set-Up
FROSTMED PRO, LITE and LITE CV models use CO
2
canisters to provide coolant.
To set-up your FROSTMED follow the below instructions:
• First open your FROSTMED package.
• The package contains the following items:
- 1 FROSTMED device (PRO or LITE or LITE CV)
- 2 CO
2
refillable canisters (2,5 lbs. each for the PRO model, 1 lb. each for the LITE
and LITE CV models)
- 1 rechargeable Lithium-Ion battery pack
- 1 USB cable
- 1 canister retaining clamp (for PRO version only. It can be used to better secure
canisters in enclosure)
- 1 carry handle (for PRO model only)
- 1 warranty
- 1 User Manual.
• The rechargeable battery pack must be charged before first use. Charge the
rechargeable battery pack via a Micro-USB input on the top of the battery pack case
(see Figure 2). The battery pack connects to any common USB phone charger (iPhone
/Android) via a Micro-USB cable.