Datasheet

 2007-2019 Microchip Technology Inc. DS30009905F-page 205
PIC24FJ256GA110 FAMILY
bit 3 CS1P: Chip Select 1 Polarity bit
(1)
1 = Active-high (PMCS1/PMCS1)
0 =Active-low (PMCS1
/PMCS1)
bit 2 BEP: Byte Enable Polarity bit
1 = Byte enable active-high (PMBE)
0 = Byte enable active-low (PMBE
)
bit 1 WRSP: Write Strobe Polarity bit
For Slave Modes and Master Mode 2 (PMMODE[9:8] = 00, 01, 10):
1 = Write strobe active-high (PMWR)
0 = Write strobe active-low (PMWR
)
For Master Mode 1 (PMMODE[9:8] = 11):
1 = Enable strobe active-high (PMENB)
0 = Enable strobe active-low (PMENB
)
bit 0 RDSP: Read Strobe Polarity bit
For Slave Modes and Master Mode 2 (PMMODE[9:8] =
00, 01, 10):
1 = Read strobe active-high (PMRD)
0 = Read strobe active-low (PMRD
)
For Master Mode 1 (PMMODE[9:8] = 11):
1 = Read/write strobe active-high (PMRD/PMWR)
0 = Read/write strobe active-low (PMRD
/PMWR)
REGISTER 18-1: PMCON: PARALLEL MASTER PORT CONTROL REGISTER (CONTINUED)
Note 1: These bits have no effect when their corresponding pins are used as address lines.