Datasheet

PIC32MX5XX/6XX/7XX
DS61156D-page 32 © 2010 Microchip Technology Inc.
CVREF- 15 28 L2 I Analog Comparator Voltage Reference (low).
CVREF+ 16 29 K3 I Analog Comparator Voltage Reference (high).
CV
REFOUT 23 34 L5 O Analog Comparator Voltage Reference output.
C1IN- 12 21 H2 I Analog Comparator 1 negative input.
C1IN+ 11 20 H1 I Analog Comparator 1 positive input.
C1OUT 21 32 K4 O — Comparator 1 output.
C2IN- 14 23 J2 I Analog Comparator 2 negative input.
C2IN+ 13 22 J1 I Analog Comparator 2 positive input.
C2OUT 22 33 L4 O — Comparator 2 output.
PMA0 — 44 L8 I/O TTL/ST Parallel Master Port Address Bit 0 input
(Buffered Slave modes) and output (Master
modes).
PMA1 — 43 K7 I/O TTL/ST Parallel Master Port Address Bit 1 input
(Buffered Slave modes) and output (Master
modes).
PMA2 8 14 F3 O — Parallel Master Port address (Demultiplexed
Master modes).
PMA3 6 12 F2 O —
PMA4 5 11 F4 O —
PMA5 4 10 E3 O —
PMA6 16 29 K3 O —
PMA7 22 28 L2 O —
PMA8 32 50 L11 O —
PMA9 31 49 L10 O —
PMA10 28 42 L7 O —
PMA11 27 41 J7 O —
PMA12 24 35 J5 O —
PMA13 23 34 L5 O —
PMA14 45 71 C11 O —
PMA15 44 70 D11 O —
PMCS1 45 71 C11 O — Parallel Master Port Chip Select 1 strobe.
PMCS2 44 70 D11 O — Parallel Master Port Chip Select 2 strobe.
TABLE 1-1: PINOUT I/O DESCRIPTIONS (CONTINUED)
Pin Name
Pin Number
(1)
Pin
Type
Buffer
Type
Description
64-Pin
QFN/TQFP
100-Pin
TQFP
121-Pin
XBGA
Legend: CMOS = CMOS compatible input or output Analog = Analog input P = Power
ST = Schmitt Trigger input with CMOS levels O = Output I = Input
TTL = TTL input buffer
Note 1: Pin numbers are provided for reference only. See the “Pin Diagrams” section for device pin availability.
2: See Section 24.0 “Ethernet Controller” for more information.