Daim Ntawv Qhia Tus Neeg Siv

1. Jumpers Configuration
The SAMRH707 100-pin Motor Control PIM can be used on the following boards:
• The dsPICDEM
™
MCLV-2 development board (DM330021-2)
• The dsPICDEM
™
MCHV-3 development board (DM330023-3)
• The dsPICDEM
™
MCSM development board (DM330022)
For that, the jumpers are configured as follows:
Table 1-1. Jumpers Configuration
MCLV-2 Board PMSM Motors MCHV-3 Board PMSM Motors MCSM Board Steppers Motors
J14 CLOSE J14 CLOSE J14 OPEN
J5 OPEN/CLOSE J5 CLOSE J5 OPEN
J6 OPEN/CLOSE J6 CLOSE J6 OPEN
J7 OPEN/CLOSE J7 CLOSE J7 OPEN
J8 CLOSE J8 OPEN/CLOSE J8 OPEN
J9 CLOSE J9 OPEN/CLOSE J9 OPEN
J10 OPEN/CLOSE J10 CLOSE J10 OPEN
SAMRH707
Jumpers Configuration
© 2022 Microchip Technology Inc.
and its subsidiaries
Other
DS60001796A-page 4