How-To Guide

Transmitter (T) microphone mode
- When you connect an external audio to a 3.5mm
audio jack on the transmitter, the microphone and
external audio sound are broadcasted simultaneously.
Transmitter (T) bluetooth mode
External audio input
Transmitter is broadcasting microphone sound to receiver.
Transmitter is broadcasting Bluetooth sound to receiver.
Start searching for Bluetooth in the
settings on your smartphone, then
connect the "GENIESOR2 SVS" device.
- To Mute On, press Down button shortly and press
Up button shortly to Mute Off.
Sound source Mute
- Press the function button long to change to the
Bluetooth mode.
Change to Bluetooth mode
- Press the function button long to change to
the microphone mode.
Change to microphone mode
- Press the "+" up button long to enter pairing mode.
(The green and red LEDs flash repeatedly)
How to pair a Bluetooth device
E-mail. [e-mail]
LONG PRESS
Mute On
Mute Off
SVS-T : R-REM-uwc-SVS-T
SVS-R : R-REM-uwc-SVS-R
Battery : XU100987-17002B-5
KC certification number
Smart Voice Sender (SVS)
User’s Guide
Ver 2.0
(16229) 154-42, GwangKyosan-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16227 Korea
Tel. [phone] FAX. [phone]
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
CAUTION
Size / Weight
Bluetooth / Usable frequency / Modulation
Continuous usage time
Battery capacity / Service temperature
W 28.2 X H 82 X T12.2 [mm], 27g
4.2 / 2,402 ~ 2,480 MHz / FHSS
SVS-T Max 5 hours, SVS-R Max 7 hours
3.7V 450mAh /5 ~35 C
To prevent possible hearing damage when using a headset,
do not listen to sound at high volume for long periods.
LONG PRESS
> Enter Pairing
Mode
LONG PRESS
OVER 2 SEC.