Operator`s manual

Appendix D Quick Reference Command Summary

400 Operators Manual

^A ^D Command

2 Text string entry mode: Precedes the text strings that are supplied to the

various fields in the label (Equivalent to ^B).

3 Print Command: Prints a single label or starts the printing of a batch of labels.

(Equivalent to ^C)

5 Send Printer Status: (Equivalent to ^E)

11 Print a Test Label: (Equivalent to ^K)

12 Print a Blank Label: (Equivalent to ^L)

20 Change baud rate: An EEPROM command

0 110 Baud

1 50 Baud

2 300 Baud

3 600 Baud

4 1200 Baud

5 2400 Baud

6 4800 Baud

7 9600 Baud

8 19200 Baud

21 Change SW1: Software dip switch #1. An EEPROM command. Below is the

^AB sequence:

12345678

^ABxxxxxxxx

*******.)

1=XON/XOFF Enable, 0=Disable

******.))

1=8 Data Bits, 0=7 Data Bits

*****.)))

1=Echo Enable, 0=Disable

****.))))

1=No Parity, 0=Enable Parity

***.)))))

1=Odd Parity, 0=Even Parity

**.))))))

1=Ignore Control Codes, 0=Accept

*.)))))))))),

.)))))))))),*

Enquiry Response

00 = Control Codes

10 = Text Equivalent

11 = ^ Equivalent