Operator`s manual

Quick Reference Command Summary Appendix D
400 Operators Manual
84
22 Change SW2: Software dip switch #2. An EEPROM command.
Below is the ^AB sequence:
^ABxxxxxxxx
*******.)))),
******.)))),*
*****.)))),**
***** RRR Power-up Label Format
***** 000=ALWAYS EPROM Format 1
***** 001=ROM or Saved Format File 1
***** 010=ROM or Saved Format File 2
***** 011=ROM or Saved Format File 3
***** 100=ROM or Saved Format File 4
***** 101=ROM or Saved Format File 5
***** 110=ROM or Saved Format File 6
***** 111=ROM or Saved Format File 7
****.))))) 1=Use Saved Format File, 0=Rom Format
***.)))))) 1=Print Button Enable, 0=Disable
**.))))))) 1=Disable Button Use, 0=Enable
*.)))))))) 1=>RESTARTED< Response Enable, 0=Disable
.))))))))) 1=Clear Text Enable, 0=Disable
23 Change SW3: Software dip switch #3. An EEPROM command.
Below is the ^AB sequence:
12345678
^ABxxxxxxxx
*******. Always 0
******.) Always 0
*****.)) Always 0
****.))) Always 0
***.)))) Always 0
**.))))) 1=Send Response After a Print
** 0=No Response After a Print
*.)))))) Always 0
.))))))) 1=Disable Extended ASCII, 0=Enable