Instruction manual

Pg. 3
www.incoe.com
©INCOE® CORPORATION 8/2010
1
M SERIES
INSTRUCTION MANUAL
INTRODUCTION
1 INTRODUCTION
The M Series of temperature controllers are designed
for precision control of the hot runner system at
constant temperature for optimized efficiency.
M Series controllers are ideally suited for mid to high
volume molding requiring 16 to 128 zones.
1.1 MAIN FUNCTION
This range of M Series controllers is dedicated to
applications with a high number of zones to be
controlled.
This new generation of hot runner control systems
uses one single microprocessor for controlling up to
24 zones, making all configurations compact.
The control over 24 zones is managed by one single
microprocessor communicating with modular
control cards having the following function:
- Card for data acquisition from a control loop.
- Power control card 16A or 5A for a control loop.