Operator`s manual

Communications Chapter 3

))))))))))))))))))))))))))))))))))))))))))))

470 Operators Manual

Parallel Port Configuration

1 = /STROBE

2 = D0

3 = D1

4 = D2

5 = D3

6 = D4

7 = D5

8 = D6

9 = D7

10 = /ACK

11 = BUSY

12 = PAPER OUT

13 = SCLT

14 = NC

15 = NC

16 = LOGIC GND

17-18 = NC

19-30 = LOGIC GND

31 = /INIT

32 = /ERROR

33 = LOGIC GND

34-36 = NC

(36 PIN CENTRONICS®)

Table 2

3.2 PRINTER CABLES

For parallel connection: Use a standard 36 pin male Centronics® to 25 pin male cable,

connected from the desired parallel port of the host computer to

the 36 pin connector on the 470.

For serial connection: If your host computer has a...

9 pin serial com port - Use a 9 pin female to 9 pin male video extension cable. (pin #1 to

pin #1...)

25 pin serial com port - Use a standard 25 pin male to 9 pin male serial cable.

Note: NULL modem cable adapters are not necessary since the printer is DCE equipment.