User's Manual

http://www.microcyber.cn

2)Input in the address bar: https://192.168.2.253.

3)Confirm the security, and then continue.

4)Input username admin.

5)Input password 123456.

Now the network browser has been in the gateway s default homepage, the left side of

homepage is navigation menu, including:

Network information: Check WirelessHART network status, online device information and

measurement information.

Statistics: Provide wireless network statistic information and Modbus statistic information

Setup: Configure network, node, security, protocol and other parameters.

Figure 2-4 Gateway Homepage

2.3.3.2 TCP/IP Gateway Setting

Warning

Please be more careful when user is modifying the TCP/IP network setting. If the setting is

missing or wrong, the user probably cannot log in the gateway. Please contact network

administrator, so that the user could use TCP/IP network setting correctly.

Before installing and connect the gateway to fieldbus control network, the user shall configure IP

address and other TCP/IP network settings, as following:

1)Choose Setup > Ethernet .

2)Input the following information:

IP Address: 192.168.2.253 (gateway default IP for reference)

Netmask: 255.255.255.0

Gateway: 192.168.2.1

Notice

IP address range 192.0.0.1~223.255.255.254,

172.16.0.0~172.31.255.254,