User's Manual

http://www.microcyber.cn
6
10.0.0.0~10.255.255.254.
IP address 192.168.99.xxsegment is not available.
3)Click Submit .
4)If the reminder is Successful! , click Yes . If the reminder is Failed , the user shall resubmit
and check the gateway s Ethernet connection. Please refer to Section 5.
5)If the reminder is Restart gateway now? , click Yes . The gateway shall restart.
6)Restart network browser.
Figure 2-5 Ethernet Setting
Caution
After modifying the gateway IP, the communication with the webpage shall lost. After restarting
the browser, and using the new IP address and other TCP/IPs, the network setting shall log in the
gateway again. It may require modifying PC/portable computer s TCP/IP network setting,
PC/portable computer s IP address and gateway s IP address must be in the same network
segment.
2.3.3.3 Wireless Network Setting
Before installation the gateway and connecting it to field control network, the user shall configure
the wireless network information. The wireless network setting is as following:
1)Choose Setup > Wireless Network Setting .
2)Set the following information:
Network name: Field wireless network name
Network ID: 1 65535
Join Key: 16-byte hexadecimal numbers
Default wireless network information:
Network ID: 1229
Join Key: 00000000 00000000 00000000 00000000
3) Click Submit .
4) If the reminder is Successful! , click Yes . If the reminder is Failed , the user shall resubmit
and check the gateway s Ethernet connection. Please refer to Section 5.