User's Manual

http://www.microcyber.cn
24
00-1B-1E-62-F6-00-03-00, 1, 0,0, 180, 10,
Device Address+ Transmit Mode+ Client-side Status+Command Number+ Command Load Length
1,2,3,4,5,6,7,8,9,10
Load
Received package:
00-1B-1E-62-F6-00-03-00, 0, 0,0, 180, 11,
Device Address+ Server Response Code+ Device Status+ Command Number+ Command Load Length
0, 1,2,3,4,5,6,7,8,9,10
HART Reply Code Load
4.5 OPC
WirelessHART gateway supports OPC communication protocol. Connection between gateway and
industrial control system with OPC interface is simpler, more flexible and convenient. Industrial
control system can read measurement and diagnostic information of field device via OP interface.
4.5.1 Software Installation and Usage
Operating system supported: windows XP, windows7.
Installation
Installation software of OPC server "WirelessHartGatewayOPCSetup.exe" can be found in attached CD.
Installation method of the software is as below:
1)
Exit/close all Windows program, include any program running in background, such as virus
scanning software.
2)
Double-click installation software, pop out the following dialog. Click "Confirm", start to install.
Figure 4-5 OPC Server Installation Interface