User's Manual

http://www.microcyber.cn
25
1)
Operate based on hints
2)
After installation is completed, pop out the following dialog, OPC server will run automatically.
Figure 4-6 OPC Server Automatic Running Interface
Usage
Usage method of the software is as below:
1. Set
Under installation directory, follow pathway "Microcyber\WH_OPCServer\conf" to find fire
OPCconfig.ini , open the file, fire information input in the following figure:
Figure 4-7 OPC Server Configuration File
ip
: ip address of gateway
port:
OPC server corresponding port number, fix value as 8883.
After setting ip and port parameter, save the file, complete setting.
2. Turn on the OPC server
In the installation directory, find the file WH_OPCServe.exe as Microcyber\WH_OPCServer\bin and
double-click it. The following dialog box appears and the OPC server starts to run.