User's Manual

http://www.microcyber.cn
34
Path Stability: Path stability is the stability between node and neighbor nodes.
Path Quality: Path quality is the communication quality between node and neighbor node, and the
unit is percentage.
Path Direction: Path direction s range is valued as upstream or downstream.
Link Count: It is the number of link between node and neighbor node. If it is 0, it means there is no
path to use.
Caution
It may display none in the neighbor list and it is normal. If the user would like to check the real-
time content, please keep the web page for a while.
6.2.2.2 Burst Information
Choose Network Information > Node Information > Burst Information .
Figure 6-5 Burst Information
HART Tag: Long tag of node.
Node State: online, offline.
Burst Command: Command number of burst information.
Burst Period: Period supports range 1, 2, 4, 8, 16, 32, 60~3600 seconds.
Average period:
The gateway counts the average period during which Burst information is actually
received.
Last Update: It is the latest time for the gateway to receive node burst.
Updates: the number of burst information received by gateway.
Number of packet loss:
The number of Burst packets dropped by the gateway.
Caution
A node supports 4 pieces of Burst information at most, the list shall display all the burst
information in sequence such as Burst0, 1, 2, 3(It won t display the Burst mode which is not on).
When multiple burst use the same burst command, it may show the line order, to tell which
Burst information.