User's Manual

http://www.microcyber.cn

Figure 6-16 Node Setting

Node Type: Node device type, refer to

Table 6-1

, read-only.

Node ID: Long address of node and it provides the only hexadecimal marked by device.

HART Tag: It is used to mark field device and it supports 32 bytes at most. HART Tag supports ISO

Latin-1 characters, shown as

Table 6-2

Table 6-2 ISO Latin-1 Characters

Short Tag: It supports 8-byte length at most.

Descriptor: It supports 16-byte length at most.

Short Tag and Descriptor support Packed ASCII characters, shown as

Table 6-3

Caution

HART Tag settings can not be repeated, otherwise it may bring uncertain consequences.