User's Manual

Micro Device s.r.l Via Bellini, 31/33 20095 Cusano Milanino (MI) Italy
Tel. [phone] r.a. Fax. [phone] E-mail [e-mail]
____________________________________________________________________________________________
Yacht Controller
• 6
1.2. General receiver features
The receiver is housed in a grey polycarbonate container with a transparent cover, placed
inside and out of view of the chosen command station.
The receiver is turned on by a separte switch installed normally nearby the contol station.
The receiver acquires the commands of the transmitter and, activates the functions of the
boat accordingly.
It is possible to install an individual receiver so that it can communicate with more than one
transmitter (not simultaneously).
The system is designed for commanding only engines supplied with electronic controls.. The
electronic contols to which the receiver is connected must be activated to control the boat using
Yacht Controller.
In the event of failure of communication between the transmitter and reciever, the receiver
automatically places the engines in neutral and activates the acoustic signal.
Figure 2: Description of the receiver
OPENING OR DISASSEMBLY OF THE RECIEVER IMMEDIATELY VOIDS THE WARRANTY
Pro
g
rammin
g
button
Deletin
g
button
Acoustic signal
Feeding
connection and
command exits
Internal aerial
Command
exits
LED
Adapter 12/24 V connection
Feeding and receiving LED