Specifications

46
disable this function. When exiting the menu with the
EXIT key, confirm the prompt to save the favourites.
2. Lock: Press the red function key of the remote control.
The "Lock“ box will be highlighted and enabled. Select
the desired channel to be marked for locking and press
the OK key. After entering your current PIN, the channel
will be marked with a lock. Now, you can select further
channels and mark them for locking by pressing the OK
key. Press the red function key to disable this function.
When exiting the menu by pressing the EXIT key and
confirming the prompt, the channels marked with a lock
will be locked. Now, these channels can only be watched
after having entered your PIN.
Please note: In menu item "System settings – PIN" the
option "channel lock" must be enabled. If it is disabled,
the locks will be inactive until the option "channel lock"
has been enabled again.
3. Skip: Press the green function key of the remote
control. The "Skip" box will be highlighted and enabled.
Select the desired channel to be skipped. After having
pressed the OK key it will be marked with an arrow. Now,
you can select further channels and mark them for being
skipped by pressing the OK key. Press the green function
key to disable this function. When exiting the menu by
pressing the EXIT key and confirming the prompt, the
channels to be skipped will be saved. When zapping,
these channels will be skipped.

If the changes regarding FAV, Lock and Skip
have been enabled by confirming the prompt,
they can be undone in the same way as
described above.