User's Manual

802.11a Bridge AP5822 MTI Proprietary Page 26
3-9 System Advanced Configuration Window
The System Advanced Configuration window allows the setting of detail operating information
for the Bridge. Click on button from any window to access the System Advanced
Configuration window (see Figure below).
Table summarizes the data fields on the Radio Advanced Configuration window.
Table Radio Advanced Configuration Window Field Descriptions
Advanced Configuration Field Description
Data Rate Specifies rate of data transmission. Select the
desired rate from the drop-down menu. The
Best selection will adapt the rate to the best
available.
Transmit Power
Specifies the level of transmit power. Choose
the
value of the transmit power from the
dropdown menu.
Decrease the transmit power if more than one
AP is co-located using the same channel
frequency.
Beacon Interval Specifies the Beacon Interval value. Enter a
value between 20 and 1000.
Data Beacon Rate Specifies the Data Beacon Rate. Enter a value
between 1 and 16384 that specifies the
Delivery Traffic Indication Message (DTIM).
Fragment Length Specifies the fragment length. Enter a value
between 256 and 2346.
RTS/CTS Threshold Specifies the value of t he RTS/CTS threshold.
Enter a value between 256 and 2346.