User's Manual

MICROELECTRONICS TECHNOLOGY INC. P.11
From the Tag Access dialog box, the user can perform many different access
operations against tags as follows.
3.3.1.1 Access Type Read
Selecting the Read Access Type option displays the configuration dialog
shown in the figure above.
From this dialog, the user can perform a read operation against
tags and can provide the following configurable parameters:
 Memory Bank—the target for the read operation, has selectable values
of either the EPC, TID, User, or Reserved memory bank
 Offset—the offset in hexadecimal of the first 16-bit word to read from the
target memory bank
 Count—the number of 16-bit words to read, starting at Offset
 Access Pwd—the previously applied access password for the target tag,
or no entry for tags with no access permissions
Output from read operations is directed to the primary application window.
3.3.1.2 Access Type Write
Selecting the Write Access Type option displays the configuration dialog
shown in the figure below.