User's Manual

MTI RFID ME User Manual
- 18 - Dec 30, 2011
4. Inventory Run
After configuring the MTI RFID ME settings as described in Section 3, you are ready to start an
inventory run. Select the “Start Scan” button located in the lower left corner of the window as
shown in Figure 16.
Figure 16
Figure 17 shows the results of a “Start Scan” operation and where the MTI RFID ME is reading
one tag. As illustrated below, the EPC for each of the tags and Relative Signal Strength Indicator
(RSSI) is presented. In this example EPC tag 33-33-33-33-33-33-33-33-33-33-33-33 has a RSSI of
67%. The RSSI varies during the period of measurement based on the received signal strength.
Figure 17