User's Manual

MTI RFID ME User Manual
- 25 - Dec 30, 2011
 Memory Bank Pass Message：
When the read memory command is successful, a confirmation message “Read
everything (8 Bytes) – OK - -“ as shown in Figure 28 will be displayed.
Figure 28
 Memory Bank Fail Message：
If the read memory bank process fails, a message box like the one shown below
in Figure 28 will be displayed. Repeat the read memory bank process over until
you successfully read the memory bank successfully.
Note: One remedy that can increase your read memory bank successfully, is to
move the tag closer to the reader, or increase the Transmit Output Power to a
higher setting.
Figure 29