User's Manual

MTI RFID ME User Manual
- 27 - Jul 9, 2014
Figure 24
5.1.4. Kill
Click “Kill” button then enter setting window to kill a tag with kill password. For more information
about kill and kill password please refer to Class 1 Generation 2 UHF Air Interface Protocol
Standard “Gen 2” at
http://www.epcglobalinc.org/standards/uhfc1g2
Figure 25
5.1.5. NXP Command
Click “NXP Command” button then enter setting window to execute command for NXP tag.
Moreover, “Configuration” must be set if select “ChangeConfig 09-00”. For more information
about NXP command, please refer to SL3ICS1002/1202 UCODE G2xM and G2XL at
http://www.nxp.com/documents/data_sheet/SL3ICS1002_1202_139036.pdf
 NXP Command
 Set Read Protect 02-01: Enable reliable read protection of the entire G2X memory.
 Unset Read Protect 02-00: Reset the ReadProtect-bit and re-enables reading of the
G2X memory content according the EPCglobal specification.
 Change EAS ON 01-01: An EAS-Alarm bit set to ‘1’ the tag will reply to an