User Manual
A8 Configuration Manual - fm_1.2.6.3_v4.1.FCC.doc ASTRI Confidential & Restricted Access
Page 33 of 36
10 C
ONFIGURE A USER ACCOUNT IN THE
FTP
S
ERVER
This section will show how to configure a user account in the FTP server software. GuildFTPd
FTP Deamon is used for demonstration purposes.
1. Install the software in the FTP server.
2. Under the System → Group, create a user account, for example “ftpuser”, as shown in
Figure 34.
3. After the user account is created, select the user account, and then click the icon “edit
user“ in the tool bar. Switch to Advanced Mode by clicking the bottom “Advanced”
button in the “edit user” window, as shown in Figure 35. Press “Yes” for confirmation.
4. Select the user account again, and then click the icon “add path“ in the tool bar. Click
the bottom “Browse…” buttion, next to “Local path:” to select the location where the
firmware file is stored.
5. The user account has successfully been created. You may download or upload the
firmware using this account.
Figure 34. Creating a FTP user account