User Manual

A8 Configuration Manual - fm_1.2.6.3_v4.1.FCC.doc ASTRI Confidential & Restricted Access
Page 18 of 36

5.2 C HECKING THE A8 F IRMWARE V ERSION
The running version can be checked by selecting About in the menu bar. In Figure 13, the
firmware version is 1.2.6.3. FPGA version is 45. SAP BSP stands for Smart Access Point Board
Support Package, which is hardware related version number.
Figure 13. Firmware Version
5.3 S ETUP – IP A DDRESS
The user can configure the IP address by selecting System in the tool bar, as shown in Figure 14.
By clicking the box of Enable DHCP Client and button Update, the A8 BTS will acquire a
dynamic IP address from the DHCP server after reboot.
Figure 14. IP Address Configuration