User's Manual

Page 19 of 35
MTI Proprietary
3.5 WiMAX Setting
Click “WiMAX Setting” at CPE web page, customer can setup MAC address and FFT size, shown as
Figure 11.
Figure 11 WiMAX Setting
MAC Address Clone provides three options: Disabled (default), Manual and Clone.
 Disable: Default WiMAX 16e MAC address (on label) will be used without replacement MAC
address.
 Manual: User must provide a MAC address (ex. PC, Access Point, etc…) for connection with BS,
CPE uses this MAC address instead of default WiMAX 16e MAC address.