User's Manual

Page 24 of 35
MTI Proprietary
3.7 EAP Setting
By clicking “EAP Setting” at CPE web page, setup Extensible Authentication Protocol (EAP), shown as
Figure 14.
Figure 14 EAP Setting
 PKM (Privacy and Key Management): Select “v2 (EAP)” to enable PKM, or select “None” to
disable PKM. Once PKM is disabled, then all the following items will be disabled too.
 EAP Method: Supports TTLS
 Outer Identity: Enter outer identity. Max length for Identity is 200 characters and for Realm is 48
charcters.