User manual

REI2
User manual
Doc: R2U_2_1079_002_E
Version: 1.07.9
Page
12 of 64
2.2. Back
SUPPLY
ANALOG I/O DIGITAL I/O
RADIO
COMPUTER
A
COMPUTER
B
DISPLAY
BOARD
REI 2
NET
START LAP STOP AUX
TIMING
INPUTS
LINKPOD
POWER
1
2
3
4
5
6
7
8
9
10
11
12
13
15
16
14
Fig. 5 – Back (connectors)
2.3. Connectors
1. On/Off Switch
2. Power
3. Analogue inputs for the connection of sensors with analogue outputs, such as the sensors for air
temperature/humidity and snow temperature
4. Digital input output for connection to devices with digital command (e.g. MicroSem signal
light) or unblocking devices
5. Input for LinkGate Decoder and DecRadio connection
6. Serial I/O ‘A’ for computer connection
7. Seriale I/O ‘B’ for computer connection. The two connections can supply and receive different
data simultaneously
8. Connection for displayboards
9. Connection for REI2 NET network – a number of REI2 operators collaborate at the same event
10. Start line input
11. Lap line input
12. Stop line input
13. Aux line input
14. Grounds
15. Lines: input (duplicated) of the main lines
16. Connection for LinkPod system