User manual

REI2
User manual
Doc: R2U_2_1079_002_E
Version: 1.07.9
Page
30 of 64
The maximum current available on this connector is 5 milliamperes.
13.10. Power supply
The external power source such as, for example, the adaptor/battery charger supplied in the REI2
package, should be connected to this connector. REI2 accepts a voltage of between 9 and 24 volts
on the input. Keep in mind that with voltages between 9 and 11 volts the internal batteries cannot be
recharged but only ‘maintained’ (see section 7, Battery recharge on page 20).
13.11. Starter
An acoustic start device can be connected to this connector, which is located on the left side of
REI2.
The minimum load allowed is 4 Ω.