Specifications

microHAM © 2008 All rights reserved
HELP MENU
Manuals: Link to microHAM manuals located on your system
Setup Guides: Link to software configuration guides for many common applications.
Download Documents: Downloads microHAM documentation including updated manuals and setup
guides. You may specify the products for which you want documentation.
NOTE: Requires an internet connection.
microHAM Home Page: Link to www.microHAM.com
microHAM Downloads Page: Link www.microham.com/downloads.html
Show Tooltips: When checked, small, single line help is displayed below the mouse cursor
Update Router: Download and install the most recent version of Rotuer.
About: Shows the Router's internal version number
DEVICE CONFIGURATION TABS
There are three (3) tabs for configuring DIGI KEYER. Each tab controls a part of DIGI KEYER's functions.
Any change to the first two (2) tabs are applied immediately to DIGI KEYER. Changes in Messages are
NOT applied automatically. To store them use buttons Store or Store All.
Ports - used to assign virtual ports to the DIGI KEYER
for use by applications.
Keying - used to configure timing of the PTT signal,
opertion of the FSK keyboard and the audio
processor.
Messages – used to store FSK messages.
15