Specifications

Minimize: Clicking this will minimize Router to the system

tray at the bottom right corner of the Windows Task

Bar (the "System Notification Area").

TIP: When Router is minimized you can restore it by double-clicking on the Router tray icon.

You can also restore Router by double-clicking on the Router icon on the desktop or in the

Programs menu.

Exit: Clicking on this item will terminate Router.

Note: when Router is terminated, application software will be unable to communicate with MK2R and

the radio.

PRESET MENU

The requirements of each application (logging, control and digital

mode programs) are different and each program handles radio

control, CW, FSK, PTT, and the sound card its own way. In some

instances what works for one application may not work properly

with another. To get maximum performance from MK2R, you

may wish to customize the settings for each application.

For easy switching among applications, Router supports up to 12

user definable Presets. Different configurations can be stored in

these presets and recalled almost instantly simply by clicking on

the preset button.

Each preset contains the settings for all devices connected to,

and controlled by, Router. For example, if Router controls a

MK2R, a microKEYER, a CW Keyer and a USB Interface, each

preset remembers the settings for all four devices including the

assignment of COM ports and the contents of all sub-tabs except

the FSK/CW Messages tabs.

There are three ways to apply a preset once it is created:

1. Click Preset and select from the pull-down menu.

2. Click on a preset button. To have buttons visible in Router, Preset | Show Buttons must be checked.

When the settings from a preset are applied, a green light located in the preset button is lit. The green

light is on ONLY when all settings in Router are same as those stored in the preset.

3. By right clicking on the system tray icon when the Router is minimized.