Specifications

microHAM © 2006 All rights reserved
VIRTUAL PORT MENU
It is necessary to create several virtual serial ports (COM
ports) in order for a Windows application (logging, control
or digital mode program) to access microHAM devices.
Create - Creates virtual COM ports. It is possible
to select more ports at once by holding the Ctrl
key on the keyboard and clicking on COM port
numbers. Creating a virtual port may take a
while, be patient.
Delete - Deletes any single virtual port.
Delete All - Deletes all previously created virtual
ports and resets Virtual Serial Port bus.
Do not delete a virtual port unless all applications
using that port have been closed.
Successfully created Virtual Serial Ports can be
reviewed in Device Manager, under the ELTIMA
folder.
Note: Properly working ports should not
display an exclamation mark (!).
HELP MENU
microHAM Home Page - Link to www.microHAM.com
microHAM Downloads page - Link for downloading the latest software and firmware updates
Show Tooltips - When checked, small, single line help is displayed below the mouse cursor
About - Shows the version number
26