Specifications

When Router is able to read the operating mode, Follow Radio

provides the greatest flexibility and ease of operation. The same

settings are available as with Fixed Mode but switching among

them is automatic based on the operating mode (and, optionally,

frequency). The current mode is displayed on the Ports tab.

This mode is translated to the VOICE, DIGITAL, FSK or CW

groups. The selected audio routing is indicated by a black frame

around the setting combo box.

– CW modes are CW and CW-R. The audio setting is

unimportant for CW as the microphone input is not used for

transmit.

– VOICE modes are: USB, LSB, AM and FM. The three

standard audio configurations (ACmA), (CmCmA), and

(CmCmCm) and two nonstandard (CmBA) and (ABA) for

SSTV.

– FSK modes are FSK, FSK-R, RTTY and RTTY-R. BBB is

selected for FSK.

– DIGITAL modes are: PKT, DIG and DATA. Router also

permits selecting DIGITAL settings for LSB, USB and FM if the operating frequency is in the “digital”

portion of the band as defined in the Digital Band Map. See Ports Tab – Radio Control for more

information.

For either fixed or follow radio switching, it is necessary to tell MK2R which

channel of the sound card to use for RADIO1 and which for RADIO2. This

is done with the Left / Right selector labeled Use line out channel. When

Left channel is assigned to RADIO1, RADIO2 is automatically assigned

Right channel and vice versa. Because there is no standard, you can

configure MK2R to match your software using this selector.

Perform the same Audio Switching configuration for RADIO2.