User's Manual

p900 Operating Manual 9
A. Approved Antennas
Group
Part Number
Description
Rubber Ducky
MHS031000
2.5dBi, 900MHz Rubber Ducky Antenna RPTNC Swivel
MHS031070
2.5dBi, 900MHz Rubber Ducky Antenna Reverse SMA Swivel
MHS031080
2.5dBi, 900MHz Rubber Ducky Antenna Reverse SMA Straight
Transit Antennas
MHS031210
3dBi, 900 MHz Transit Antenna with Ground Plane
MHS031220
3dBi, 900MHz Transit Antenna No Ground Plane
MHS031230
3dBi, 900MHz Transit Antenna Permanent Mount GP
MHS031240
3dBi, 900MHz Transit Antenna Permanent Mount NGP
Mounts for Transit Antennas have a RPTNC Pigtail
Yagi Antennas
MHS031311
6dBd, 900MHz Yagi Directional Antenna Antenex, RPTNC Pigtail
MHS031431
6.5dBd, 900MHz Yagi Directional Antenna Bluewave, RPTNC Pigtail
MHS031501
9dBd, 900MHz Yagi Directional Antenna Antenex, RPTNC Pigtail
MHS031441
10dBd, 900 MHz Yagi Directional Antenna Bluewave, RPTNC Pigtail
MHS031451
11dBd, 900 MHz Yagi Directional Antenna Bluewave, RPTNC Pigtail
Patch Antennas
MHS031440
8dBi 900 MHz Patch Antenna, RPTNC Pigtail
Omni Directional
MHS031251
3dBd, 900MHz Omni Directional Antenna Antenex, RPTNC Pigtail
MHS031461
3dBd, 900 MHz Omni Directional Antenna Bluewave, RPTNC Pigtail
MHS031321
6dBd, 900MHz Omni Directional Antenna Antenex, RPTNC Pigtail
MHS031471
6dBd, 900 MHz Omni Directional Antenna Bluewave, RPTNC Pigtail
WARNING:
Changes or modifications not expressly approved by Microhard Systems Inc. could void the user’s authority to operate
the equipment. This device has been tested with MMCX connectors with the antennas listed in Appendix A When
integrated in OEM products, fixed antennas require installation preventing end-users from replacing them with non-
approved antennas. Antennas not listed in the tables must be tested to comply with FCC Section 15.203 (unique
antenna connectors) and Section 15.247 (emissions). Please Contact Microhard Systems Inc. if you need more
information.
Industry Canada: This device has been designed to operate with the antennas listed below, and having a maximum gain
of 13.2 dBi. Antennas not included in this list or having a gain greater than 13.2 dBi are strictly prohibited for use with
this device. The required antenna impedance is 50 ohms. To reduce potential radio interference to other users, the
antenna type and its gain should be so chosen that the equivalent isotropically radiated power (EIRP) is not more than
that required for successful communication. This Class B digital apparatus complies with Canadian ICES-003.