Operating Manual

pX2 Gen2 Operating Manual 9
A. Approved Antennas
This radio transmitter (IC:3143A-A15PX2) has been approved by Innovation, Science and Economic Development
Canada to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not
included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited
for use with this device.
Le présent émetteur radio ( IC : 3143A-A15PX2) a été approuvé par Innovation, Sciences et Développement économique
Canada pour fonctionner avec les types d'antenne énumérés ci‑dessous et ayant un gain admissible maximal. Les types
d'antenne non inclus dans cette liste, et dont le gain est supérieur au gain maximal indiqué pour tout type figurant sur la
liste, sont strictement interdits pour l'exploitation de l'émetteur.
Part Number
Description
Rubber Ducky
MHS031
1
00
2
dBi,
2.4G
Hz Rubber Ducky Antenna RPTNC Swivel
MHS031
11
0
2
dBi,
2.4G
Hz Rubber
Ducky Antenna Reverse SMA Swivel
MHS031
120
2
dBi,
2.4G
Hz Rubber Ducky Antenna Reverse SMA Straight
MHS0311
21
2.5dBi
2.4 GHz
Rubber Ducky Antenna Reverse SMA Swivel
Yagi Antennas
MHS03
4100
9 dBi, 2.4GHz Yagi Directional Antenna RPTNC
Pigtail
MHS03
4000
12 dBi, 2.4GHz Yagi Directional Antenna RPTNC Pigtail
MHS03
4120
14 dBi, 2.4GHz Yagi Directional Antenna RPTNC Pigtail
MHS03
4150
14.5 dBi, 2.4GHz Yagi Directional Antenna RPTNC Pigtail
Patch Antennas
MHS03
4200
8 dBi,
2.4GHz Mini Flat Patch Directional Antenna RPTNC Pigtail
MHS034210
14 dBi, 2.4GHz Flat Patch Directional Antenna RPTNC Pigtail
Omni Directional
MHS031
260
5 dBi, Omni Directional Antenna RPTNC Pigtail
MHS03
4000
6 dBi, 2.4GHz Omni
Directional Antenna RPTNC Pigtail
MHS03
1340
8 dBi, Omni Directional Antenna RPTNC Pigtail
MHS03
4020
10.5 dBi, 2.4GHz Omni Directional Antenna RPTNC Pigtail
MHS034030
12 dBi, 2.4GHz Omni Directional Antenna RPTNC Pigtail
MHS034040
15 dBi,
2.4GHz Omni Directional Antenna RPTNC Pigtail
WARNING:
Changes or modifications not expressly approved by Microhard Systems Inc. could void the user’s authority to operate
the equipment. This device has been tested with UFL connectors with the antennas listed in Appendix A When
integrated in OEM products, fixed antennas require installation preventing end-users from replacing them with non-
approved antennas. Antennas not listed in the tables must be tested to comply with FCC Section 15.203 (unique
antenna connectors) and Section 15.247 (emissions). Please Contact Microhard Systems Inc. if you need more
information.
ISED Canada: This device has been designed to operate with the antennas listed above, and having a maximum gain of
15 dBi. Antennas not included in this list or having a gain greater than 15 dBi are strictly prohibited for use with this
device. The required antenna impedance is 50 ohms. To reduce potential radio interference to other users, the antenna
type and its gain should be so chosen that the equivalent isotropically radiated power (EIRP) is not more than that
required for successful communication. This Class B digital apparatus complies with Canadian ICES-003.
ISDE Canada: Cet appareil a été conçu pour fonctionner avec les antennes énumérées ci-dessus, et ayant un gain
maximal de 15 dBi. Antennes pas inclus dans cette liste ou présentant un gain supérieur à 15 dBi sont strictement
interdits pour une utilisation avec cet appareil. L'impédance d'antenne requise est de 50 ohms. Pour réduire les
interférences radio potentielles pour les autres utilisateurs, le type d'antenne et son gain doivent être choisis afin que la
puissance isotrope équivalente (PIRE) ne soit pas supérieure à celle requise pour une communication réussie rayonnée.
Cet appareil numérique de classe B est conforme à la norme ICES -003 du Canada.