User's Guide

© Microhard Systems Inc. 4
2.0 Quick Start
 Connect A PC configured for DHCP directly to the ETHERNET port of the IPn4G,
using an Ethernet Cable. If the PC is configured for DHCP it will automatically
acquire a IP Address from the IPn4G.
 Open a Browser Window and enter the IP address 192.168.168.1 into the ad-
dress bar.
 The IPn4G will then ask for a Username and Password. Enter the factory defaults
listed below.
192.168.168.1
The factory default
network settings:
IP: 192.168.168.1
Subnet: 255.255.255.0
Gateway: 192.168.168.1
The Factory default login:
User name: admin
Password: admin
The factory default login:
User name: admin
Subnet: admin
It is always a good idea to
change the default admin
login for future security.