IMPORTANT SAFETY INSTRUCTIONS
Language IMPORTANT SAFETY INSTRUCTIONS! 1. READ these instructions. 2. KEEP these instructions. 3. HEED all warnings. 4. FOLLOW all instructions. 5. DO NOT use this apparatus near water. 6. CLEAN ONLY with dry cloth. 7. DO NOT block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. DO NOT install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
17. The mains plug of the power supply apapter shall remain readily operable. 18. DO NOT overload wall outlets or extension cords beyond their rated capacity as this can cause electric shock or fire. The exclamation point, within an equilateral triangle, is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
WARNING: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. WARNING: Do not place batteries in mouth or ingest. Keep out of reach of children and pets. WARNING: Do not recharge non-rechargeable batteries. WARNING: Operating temperature between 32ºF/0ºC and 95ºF/35ºC Please dispose of any used batteries properly, following any local regulations. Do not incinerate. WARNING: Do Not Open! Risk of Electrical Shock.
EU COMPLIANCE INFORMATION Eligible to bear the CE mark; Conforms to European Union Low Voltage Directive 2006/95/EC; European Union EMC Directive 2004/108/EC; European Union WEEE Directive 2002/96/EC; European Union Eco-Design Directive 2009/125/EC; European Union Radio and Telecommunications Terminal Equipment (R&TTE) Directive 1999/5/EC; European Union Restriction of Hazardous Substances Recast (RoHS2) Directive 2011/65/EC; This product contains batteries that are covered under the 2006/66/EC European Dir
FCC AND CANADA EMC COMPLIANCE INFORMATION This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
NMB-003 du Canada. WIRELESS TRANSMITTER COMPLIANCE INFORMATION The term “IC:” before the radio certification number only signifies that Industry Canada technical specifications were met. Le terme «IC:» avant le numéro de certification radio signifie seulement que les spécifications techniques d’Industrie Canada ont été respectées. This device complies with Industry Canada’s licence-exempt RSSs.