User's Manual

MD213
Paired
and
connecting
F
MD213
Paired
not
connected
ED
MD213
Pair with
the
speaker
Bluetooth mode (initial use)
1. Turn on the speaker. The Bluetooth function is
the default mode.
2. The front LED will illuminate in Red and Blue
colours steadily for several seconds before
blinking in Blue for Bluetooth pairing.
3. Activate the Bluetooth mode on your mobile
phone or notebook.
4. In the Bluetooth setup screen, search for the discoverable device name of
“MD213”.
5. Once located, select and pair with it. Thereafter, select and connect to it. A
“beep” is sound and the front LED will illuminate steadily when the
connection is successful.
Scan for
devices
Smartphone:
Turn on
Bluetooth®
mode
A
B
Disclaimer: All symbols and logos belong to the respective brand holder
or registered holder. All specifications and information are subject to
changes without further notice. Slight variations and differences might
appear between the printed photos and actual product due to product
enhancement.
The Bluetooth® word mark and logos are registered trademarks owned
by Bluetooth SIG, Inc. and any use of such marks by Microlab Electronic
Co., Ltd is under license. other trademarks and trade names are those of
their respective owners.
www.microlab-global.com
Microlab Electronics Co., Ltd
Made in China
MD213
Caution:
To reduce the risk of electric shock, do not dismantle the product and do not expose the apparatus to
rain or moisture. No user-serviceable parts inside. Refer servicing to qualified personnel only.
Explanation of Graphical Symbols:
The lightning flash within an equilateral triangle is intended to alert you to the presence of
uninsulated dangerous voltage within the product's enclosure that may be of sufficient
magnitude to constitute an electric shock to a person or persons.
The exclamation point within an equilateral triangle is intended to alert you to the presence
of important operating and maintenance (servicing) instructions in the literature
accompanying the product.
WARNINGS:
1. Read Instructions - All the safety and operating instructions must be read before the product is
operated.
2. Retain Instructions - The safety and operating instructions should be kept with the product for
future reference.
3. Heed warnings - All warnings on the product and in the operating instructions should be
adhered to.
4. Follow instructions - All operating and users’ instructions should be followed.
5. Installation - Install in accordance with the manufacturers’ instructions.
6. Power sources - This product should be operated only from the type of power source indicated
by the marking adjacent to the power cord entry. If you are not sure of the type of power supply
to your home, consult your product dealer or local power company.
7. Grounding or polarization - the product is not required to be grounded. Ensure the plug is fully
inserted into the wall outlet or extension cord receptacle to prevent blade or pin exposure. Some
versions of the product are equipped with a power cord fitted with a polarized alternating line
plug (a plug having one blade wide than the other). This plug will fit onto the power outlet only
one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to fit, contact your electrician to replace your
obsolete outlet. Do not defeat the safety purpose of the polarized plug. When using an extension
power-supply cord or a power-supply cord other than that supplied with the product, it should
be fitted with the appropriate molded plugs and carry safety approval appropriate to the country
of use.
8. Power cord protection - Power-supply cords should be routed so that they are not likely to be
walked on, kinked or pinched by items placed on or against them, paying particular attention to
cords from plugs, receptacles and the point where they exit from the appliance.
9. Overloading - Do not overload wall outlets, extension cords or multiple sockets, as this can
result in a risk of fire or electric shock.
10. Ventilation - The product must be properly ventilated. Do not place the product on a bed, sofa,
or other similar surface. Do not cover the product with any items such as tablecloths,
newspapers, etc.
11. Heat - The product should be situated away from heat sources such as radiators, heat registers,
stoves, or other products including amplifiers that produce heat. No naked flame sources, such as
lighted candles, should be placed on the apparatus.
12. Water and moisture - To reduce the risk of fire or electric shock, do not expose the product to
train, dripping, splashing or excessive moisture such as in a sauna or bathroom. Do not use this
product near water, for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet
basement, or near a swimming pool, or etc.
13. Object and Liquid Entry - Never push objects of any kind into this product through openings, as
they may touch dangerous voltage points or short-circuit parts that could result in a fire or
electric shock.
14. Cleaning - Unplug the product from the wall outlet before cleaning. The cabinet of the
subwoofer may be cleaned by dusting with a dry cloth. If you wish to use an aerosol cleaning
spray, do not spray directly on the cabinet; spray onto the cloth. Be careful not to damage the
drive units.
15. Attachments - Do not use attachments not recommended by the product manufacturers, as
they may cause hazards.
16. Accessories - Do not place this product on an unstable cart, stand, tripod, bracket or table. The
product may fall, causing serious injury to a child or adult, and serious damage to the product.
Use only with a cart, stand, tripod, bracket or table recommended by the manufacturer or sold
with the product. Any mounting of the product should follow the manufacturers’ instructions
and should use a mounting accessory recommended by the manufacturer.
17. Moving the product - A product and cart combination should be moved with care. Quick stops,
excessive force and uneven surfaces may cause the product and cart combination to overturn.
18. Un-use periods - The power cord of the device should be unplugged from the outlet during
lightning storms or when the apparatus is left unused for a long period of time.
19. Servicing - Do not attempt to service this product yourself, as opening or removing covers may
expose you to dangerous voltage or other hazards. Refer all servicing to qualified service
personnel.
20. Please remove the power plug form the main power source or wall power source when not in
use. When plugged in to a power source, the system is in standby mode, so the power is not
entirely cut off.
21. Replacement parts - When replacement parts are required, ensure the service technician has
used replacement parts specified by the manufacturer or have the same characteristics as the
original part. Unauthorized substitutions may result in fire, electric shock or other hazards.
22. Mains fuses - For continued protection against fire hazard, use fuses only of the correct type and
rating. The correct fuse specification for each voltage range is marked on the product.
23. Do not turn up the volume while listening to a section with very low level inputs or no audio
signals. If you do, the speaker may be damaged when a peak level section is suddenly played.
24. The only means of completely disconnecting the product from the power supply is by removing
the power cord from the wall outlet or the product. The wall outlet or the power cord entry to the
product must remain freely accessible at all times while the product is in use.
25. Try to install the product near a wall socket or extension cord and shall be easily accessible.
26. The highest environmental temperature suitable for this product is 40°C.
Introduction
Charging
Connections
Enhance and power your tablet’s music and sound. Compact design and small
soundbar system with two quality speaker drivers. Broaden your tablet sound
range and listen to distinct sound effects. Uniquely designed air port at the
bottom for enhanced mid sound production. Speakerphone function for picking
calls from your mobile phone during music playback.
Stream music wirelessly from your smartphone, tablet, or even your notebook.
Listen to enhanced amplified sound from your favourite gadgets. Connects to any
products with Bluetooth® wireless technology using A2DP profile and listen to
digital music.
Easy connection with alternative 3.5mm stereo plug for wide range playback
device support.
Comes with built-in rechargeable battery for portability and prolong use.
Travel with your tablet, or smartphone, and enjoy to enhanced sound
everywhere you go.
Prior to initial use, please charge the battery for 4 to 6 hours.
1. Use only the included USB cable to charge,
connect the USB type A end to the notebook or
USB hub.
2. Connect the opposite end to micro USB jack at
the speaker back panel.
3. Power on the notebook or USB hub to
commence charging. For normal usage, please
use the same steps to charge the battery.
4. Charging should complete under 4 hours.
5. The red LED will illuminate during charge, and turn
off after fully charged.
Features
Wireless music streaming with Bluetooth® wireless technology
Quality stereo speaker system with built-in amplifier
Ideal for digital music, gaming, and smartphone audio applications
Clear and powered sound with enhanced midrange sound
Soundbar type design in compact size
Connects to any 3.5mm stereo jack easily e.g., smartphone, tablet, PC,
notebook, Mp3/Mp4, CD/DVD player, etc.
Rechargeable battery for longer use and portability
Speakerphone function for call pickup during music entertainment
Portable system, ideal for traveling and music on-the-go
Dual modes: Bluetooth® Wireless Technology, and 3.5 mm stereo input
Packing List
MD213 speaker 1 pc
3.5 mm stereo audio cable 1 pc
USB charging cable 1 pc
User manual 1 pc
CHARGE
AUDIO IN
Turned ON the power
the Bluetooth mode
will be activated
QDID: 44018
CHARGE
AUDIO IN
Plug the USB
cable to the
Charging jack
at the rear
Charging LED will lit in
Red colour
# Do not charge during playback,
this will halt the system. Please
restart the speaker.
Power On/Off Charging LED USB charging port AUX Input Headphones
Rear View
CHARGE
AUDIO IN
Microphone
MD213
C
Pairing
process
Mode LED:
1. Bluetooth® - Blue
2. AUDIO IN - Red
& Blue
Front View Top View
Play/Pause/
Speakerphone/
Mute (Audio In)
Previous track
Next track
FCC WARNING
Warning: Changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
FCC STATEMENT
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful inter ference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
R eorient or relocate the receiving antenna.
I ncrease the separation between the equipment and receiver.
C onnect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
C onsult the dealer or an experienced radio/TV technician for help.




80-MD213-97-0001-03 (2014-010-9) 加FCC ID
80-MD213-97-0001-02 (2014-07-31) 改电池容量