User's Manual

Connections (continue)
Operations
Operations (continue)
Technical Specifications
Frequently Asked Questions (FAQs)
MD213
Connected
to speaker
LED illuminate in
blue steadily
LED will blink
slowly in blue
Commence
music playback
G
H
AUDIO IN (3.5 mm stereo input)
1. Insert the 3.5 mm plug into the AUDIO IN jack at the rear of the speaker
2. Insert the other end into your media player such as Smartphone, Tablet, Mp3/
Mp4 player, CD/DVD player, and PC/ Notebook.
3. Once the 3.5 mm stereo jack is connected with the 3.5 mm stereo plug, the
Bluetooth mode will automatically switched to this line input mode.
4. And the playback on the Bluetooth device will be stopped.
5. The front LED will illuminate steadily in Red and Blue colours.
1. Start the playback on the media player such as Smartphone, Tablet, Mp3/
Mp4, CD/DVD player, and PC/ Notebook.
2. Adjust the volume on the speaker to your preferred listening level.
3. Alternatively, you can adjust the master volume level from your media player.
Start playback on media
player such as
Smartphone, tablet,
iPad, notebook or
Mp3/Mp4 player
Long depress:
Increase volume
Long depress:
Decrease volume
Adjust master volume on
the media player:
-
+
Media player
Note:
This product is specially designed for
Smartphone.
Strong signal from sources, such as
notebook, tablet, or Mp3/Mp4 player can
cause distortion. Please reduce the volume
level to avoid the distortion.
Adjust master volume: Depress for several seconds to increase or
decrease the volume level. Once the maximum is reached,
there is an repeating audio tone to alert the user.
During playback, depress
once to Pause the music,
second depress to re-
activate the playback.
Smartphone / Tablet /
Mp3 / Mp4 Media player
LCD TV
PC or Note book
Media
player
CD / VCD / DVD
Blu-Ray player
CHARGE AUDIO IN
During Bluetooth® playback mode: (continue)
6. To end the conversation, depress the button again to hang up the call.
7. The interrupted music playback will resume again.
8. Note: For some legacy devices, you might be prompted to enter a password
to continue the pairing process. Please type the password “0000” to proceed.
AUDIO IN
1. Switch on the speaker power.
2. If the 3.5 mm jack is plugged, the front LED will illuminate in Red and Blue
colours.
3. Start the music playback on your media player.
4. Adjust the master volume from either the media player, or the speaker. Please
adjust the volume to your preferred listening level.
5. To interrupt your music playback, you can depress the Speakerphone button
to mute the speaker. Note: during the mute function, the media player is still
in playback mode, but no sound will be reproduced.
6. Note: “media player” refers to any media player with 3.5 mm stereo jack for
audio output, such as Smartphone, Tablet, CD/DVD player, Mp3/Mp4 player,
PC/Notebook, or LCD TV.
7. Depress the Speakerphone button again to reactivate the sound
reproduction, and continue listening to the playback.
Headphones
1. For personal entertainment, you can plug a pair of headphones, or earphones
to the speaker.
2. Connect the headphones’ 3.5 mm plug into the rear headphones jack.
3. The main speakers will be muted, and the sound is channeled to the 3.5 mm
headphones stereo jack.
4. This channeling of sound works for both Bluetooth®, and 3.5 mm Audio IN
modes, as long the headphones jack is plugged in.
Connection diagram
AUDIO IN mode: during playback, depressing the
Speakerphone button will mute the speaker
Depress to change
playback to the
Previous track
Depress to change
playback to the
Next track
Amplifier
Speakers
Interfaces
Power
Output power, RMS 4 Watt RMS
Power distribution, Watt 2 Watt x 2 RMS
Harmonic distortion < 0.5% 1 W 1 kHz
Frequency response 120 Hz - 18 kHz
Signal/Noise ratio, dB > 70 dB
Separation, dB > 55 dB
Full range driver type 1.5”
Full range impedance 4 Ohm
Output 3.5 mm stereo
headphones jack
Input 3.5 mm stereo AUDIO IN
Bluetooth® 2.1 + EDR, HSP,
HFP, A2DP, AVRCP profiles
Lithium battery 3.7V 1500 mA
Charging USB cable, Micro-USB
Questions Solutions
Power LED won't light up
No Sound
During playback, can the
battery be charged?
Cannot pair correctly with
the Bluetooth device
What are the products
supported?
Sound is distorted
If the problem still exists, please contact the distributor or seek
professional advice.
Check if the speaker battery is charged.
Ensure the front LED is lit to indicate
power is sufficient.
Check if the media player is correctly
connected. Check if the Bluetooth
connection is correctly paired and
connected.
Do not charge the battery during
playback.
Please remove previously paired devices
from your mobile, and then “search for
devices” again. Reconnect and try again.
Any playback devices such as
smartphone, tablet, PC, notebook,
CD/DVD player, media players with
3.5mm stereo plug, and Bluetooth®.
Check if the source file is not corrupted,
play a different song and
test. Ensure music file is of 192 kbps
bitrate or higher.
- the end -
© 2014 Microlab Electronics Co., Ltd All rights reserved.
Bluetooth® playback mode:
1. To pause the playback, simply depress the Speakerphone button once to
pause. The front LED will lit steadily.
2. To commence playback, depress again to reactivate the playback. The front
LED will blink slowly again to indicate playback mode.
3. Note that the above mentioned functions are also able to execute from the
media player’s own controls.
4. To change tracks during playback, depress either NEXT or PREVIOUS button.
5. When connected to a Smartphone in Bluetooth® mode, you can depress the
Speakerphone button for incoming calls. When there is an incoming call, the
speaker will emit a tone to alert the listener. You can pick your calls from the
speaker and converse through the built-in microphone. If the pickup is
during a music playback, the player will pause.
MIC
HEADPHONES
80-MD213-97-0001-03 (2014-010-9) 加FCC ID
80-MD213-97-0001-02 (2014-07-31) 改电池容量