User`s manual

2
the apparatus is left unused for a long period of time.
19.Serving Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service personnel.
20.Replacement parts When replacement parts are required, be sure the service technician has used replacement parts
specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may
result in fire, electric shock or other hazards.
21.Mains fuses For continued protection against fire hazard, use fuses only of the correct type and rating. The correct fuse
specification for each voltage range is marked on the product.
22.Do not turn up the volume while listening to a section with very low level inputs or no audio signals. If you do, the
speaker may be damaged when a peak level section is suddenly played.
23.The only means of completely disconnecting the product from the power supply is by removing the power cord from the
wall outlet or the product. Either the wall outlet or the power cord entry to the product must remain freely accessible at all
times while the apparatus is in use.
－
－
－
Unpacking:
*Fold the carton flaps right back and invert the carton and contents.
*Lift the carton clear of the contents.
*Remove the inner packing from the product.
We suggest you retain the packing for future use.
You should find following items while unpacking:
Amplifier 1pc
Woofer speaker 1pc
Center speaker 1pc
Satellite speakers 4pcs
3.5mm-2RCA audio cables 3pcs
2RCA-2RCA audio cable 1pc
User's manual 1pc
Unpacking the system
Specification
*Amplifier specification:
AC IN 220V-240V~ 50Hz 380mA
Power output 24W+12W+12Wx4 RMS
Frequency response (Woofer) 30Hz-140Hz
(Center) 140Hz-20kHz
(Satellite) 140Hz-20kHz
Sensitivity Input 430mV
Distortion <0.3%(1W 1KHz)
Separation >40 dB
S/N >70 dB
*Driver unit: (Woofer) 6.5" (magnetically shielded)
(Center) 2.5"(magnetically shielded)
(Satellite) 2.5"x4(magnetically shielded)
*Audio input: (Aux Input) RCA jacks
(5.1 Input) RCA jacks
*Audio output: RCA jacks
* Product size(DxWxH): (Amplifier)305x89x250mm
(Woofer) 259x241x280mm
(Center) 135x265x112mm
(Satellite) 135x112x195mm
Technical Information
5
Features
a
6.5 subwoofer unit made of dual Sr Magnet system blazes the trail in the use
of costly low-Q value, long-stroke program design, having the low-frequency quality of quick and
high resolution.
the ultimate aim of Microlab R&D system is to inherit and carry forward the
European musical culture style. To do this, all designs must be music-oriented and sourced from
music and art. Having Microlab, you can enjoy European musical taste.
5.1+1system:
6.5 subwoofer:
Design for music:
perfect acoustic effect could be reached if connected to the audio source with
AC-3 or DTS decoder.
＂
EAirbass: Departing from traditional bass technology, eAirbass creates no distortion when
enhancing bass. With brandnew airflow passage design, it delivers clearer sound with an extended
frequency range. The use of electronic control technology enables a precise bass signal selection for
enhanced bass delivery and crystal clear high notes reproduction. Moreover the sychronous phase
control technology guarantees accurate bass delivery, providing an effective solution for slow
frequency response. With Microlab eAirbass, distortion-free, lifelike and rigoroso deep bass is
possible.
80-fc730-97-0001-02 2008 01 02