Navigation Manual

a) Remove cover as illustrated

b) Insert the batteries (2 x size AAA 1.5V), thereby observing the indicated

polarity. When the batteries are installed, the device will check LCD

segments for 1 second accompanied with 2 short beeps.

The device then will check memory status for each user. After the

batteries are properly installed, the device enters into the sleep mode.

c) If the battery warning appears in the display, the batteries are empty

and must be replaced by new ones.

Attention!

• After the battery warning appears, the device is blocked until the

batteries have been replaced.

• Please use «AAA» Long-Life or Alkaline 1.5V Batteries. The use of 1.2V

Accumulators is not recommended.

• If the blood-pressure monitor is left unused for long periods, please

remove the batteries from the device.

Functional check: Press and hold the O/I button to test all the display

elements. When functioning correctly all segments must appear.

4.2. Sleep mode of the device

The device is designed to stay at the sleep mode as batteries are loaded. In

this mode, the time and user icon set will be displayed. You can conduct the

following operations during this mode.

• Reading the set date

Please press the TIME

button. The date set will be

displayed for 2 seconds.