User's Manual

4. Once you have set the last minute and pressed the TIME

button, the date and time are set and the time is

displayed.

5. To change the date and time, press and hold TIME for

approximately 3 seconds until the MAM symbol and

ON/OFF flash onscreen. Release and press TIME again

and the year number will flash. Enter the new values as

described above.

4.4. Using the AC power adapter

You may also operate this monitor using the included AC

adapter.

Use only the included AC adapter to avoid

damaging the unit.

a) Ensure that the AC adapter and cable are not damaged.

b) Plug the adapter cable into the AC adapter port on the

right side of monitor.

c) Plug the AC adapter into a 110 V power socket (U.S. or

Canada).

d) Test that power is available by pressing the START/STOP

button.

Note:

• No power is taken from the batteries while the AC

adapter is connected to the instrument.

• If the power is interrupted during a measurement (e.g., by

removal of the adapter from the wall socket), the instrument

must be reset by removing the plug from the instrument.

If you have any questions regarding the AC adapter, call

CVS/pharmacy

Blood Pressure Support at 1-866-464-6184.

START

STOP