WatchBP Office Professional Automated Office Blood Pressure Monitor BP 3SK1-3B Instruction Manual EN 3
FCC Requirement changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Table of Contents WatchBP Office Product description ・Contents ................................................................................................................................ 6 ・Device Version ........................................................................................................................ 6 ・Upgrading the version of the device.......................................................................................... 6 ・Product Overview ..............................
Product description The WatchBP Office consists of two major parts • The device, cuffs and accessories. • The WatchBP Analyzer Software. With the WatchBP Analyzer Software 1) The device can be programmed for the blood pressure measurement procedure. 2) Measured blood pressure values can be downloaded to the PC. 3) A PDF report and Microsoft Excel spreadsheet for data analysis can be generated. the latest WatchBP Analyzer Software from the Microlife website. * Download https://www.microlife.
WatchBP Office Product Overview Cuff Socket Power Adapter Socket Display USB port DC 7.5V 1.
Initial set up Attaching the power plug to the power adapter Select a suitable plug attachment and attach to the power adapter as shown here. Charge the battery completely When using the device for the first time, charge the battery until the recharge indicator on the device turns green. Power ON/OFF Press button to switch on the device. Press and hold button for 3 seconds to switch off the device and turn off the LCD screen. The device displays ‘oFF’ before turning off.
Before using the device WatchBP Office Selecting the correct cuff A variety of different cuff sizes are available. M and L size cuffs are provided with the device. Use the cuff marker to select the cuff size that best matches the circumference of the patient’s upper arm. Cuff Size Circumference (cm) Circumference (inch) S 14-22 5.5-8.7 M 22-32 8.7-12.6 L 32-42 12.6-16.5 L-XL 32-52 12.6-20.5 * Each cuff is provided with 130 cm air tube.
Taking measurements in MANUAL and AUTO Mode Turn on the power Turn on the device by pressing the of the device. button Connect the cuff to the device Connect the cuff to the device by inserting the cuff connector into the cuff connector socket. Select an operation mode There are two measurement modes that can be used. Press the button to switch between AUTO or MANUAL Mode.
WatchBP Office 4 Set the Atrial fibrillation (AFIB) detector – Press the or button to switch the AFIB detector ON or OFF. Press button to confirm. the AFIB detector option appears only for the device * Set version with AFIB detector. If the device has an activated AFIB detector then it is witched on in default. 5 Set the Central blood pressure (CBP) measurement – Press or button to switch ON or OFF CBP measurement. Press button to confirm.
Taking measurement in AUTO Mode Select AUTO mode. Press the button to perform automatic measurements based on the settings of AUTO mode. The device shows all the settings and then starts counting down the Resting Time before the first measurement. The average measurement reading is displayed and saved after the measurements are complete.
WatchBP Office Hide Cuff Pressure during deflation – This option helps you to determine Korotkoff K1 and K5 sound readings without digit preference. To use the HIDE function in MANUAL mode, push button to select the setting of HIDE function and confirm the selection by button and finish the setting of MANUAL mode. Taking measurement in MANUAL mode Select the MANUAL mode if auscultatory blood pressure measurement is preferred above oscillometric blood pressure measurement.
Special Functions Screening for atrial fibrillation during blood pressure measurement The device is designed to screen for atrial fibrillation during blood pressure measurements (optional) with high accuracy: a sensitivity of 98% and a specificity value of 92%*. If atrial fibrillation is detected this will be shown in the report. et al. Screening for atrial fibrillation with automated blood pressure measurement: Research evidence and Verberk practice recommendations. Int J Cardiol 2016: 465–473.
WatchBP Office The time that is needed to determine the central blood pressure value may vary among patients; i.e. with faster heart rate, less time is required for collecting the number of required PVP waveforms. It is very important to keep the arm still during the time the PVP waveforms are collected.
Using WatchBP Analyzer Installing the Software Program The latest WatchBP Analyzer Software is available from the Microlife website. https://www.microlife.com/support/software-professional-products Double click the download installer and simply follow the instructions provided in the installation window on the computer screen. Connecting the Device to a Computer It is important to only use the USB cable provided. DC 7.5V 1.5A Start the Software Program Start the software program.
Bluetooth connectivity WatchBP Office Pairing the device Press and hold the button for around 7 seconds, untill the Bluetooth icon flashes and starts pairing mode. The unique 6-digit device ID of the unit is displayed. Connect the device and confirm pairing. The Bluetooth icon is displayed on the LCD screen of the device to show the presence of Bluetooth connection. and hold the Press connection.
Using a power adapter Only use the Mains Aadapter supplied with the device to recharge the device. 1) Plug the adapter cable into the power socket of the device. 2) Plug the adapter plug into the wall socket. The battery will be recharged if the device is attached to an AC power source. After the battery is fully recharged, the charging will stop. No battery power will be used if the adapter is plugged in. The battery must always remain within the device even when using AC power. DC 7.5V 1.5A DC 7.5V 1.
WatchBP Office Observe the storage and operating conditions as described in the “Technical specifications” section of this manual.
Error messages and Troubleshooting If an error occurs during measurement, the measurement is interrupted and an error message «Er» is displayed. Error Description Potential cause and remedy "Er 1" Signal too The pulse signals on the cuff are too weak. Reposition the cuff and repeat the measurement. weak "Er 2" Error signal During the measurement, error signals were detected by the cuff, caused for instance by movement or muscle tension. Repeat the measurement, keeping your arm still.
WatchBP Office "Er 15" Abnormal result of central blood The measuring signals are inaccurate so that no result can be displayed. Read through the checklist for performing reliable measurements and then repeat the measurement. pressure reading "Er F" The device has gone into “single fault condition” “Er A” "HI" Flash memory Possible hardware fault. Try again. If the error persists, contact error Microlife or the local distributor.
Technical specifications Operation temperature/ • 10 to 40 °C (50 to 104 °F)/ 15 - 90 % relative maximum humidity humidity: Storage temperature/ humidity: • -20 to 55 °C (-4 to 131 °F)/ 15 - 90 % relative maximum humidity Weight: • 620g (including rechargeable battery pack) Dimensions: • 220.4 x 121.7 x 63.
WatchBP Office Guarantee Card This device is covered by a two-year guarantee from the date of purchase. This guarantee is valid only on presentation of the guarantee card completed by the owner confirming date of purchase or purchase receipt. Batteries and wearing parts are not covered by this guarantee.
Europe / Middle-East / Africa Microlife AG Espenstrasse 139 9443 Widnau, Switzerland Tel. +41 71 727 7000 Fax. +41 71 727 7011 Email: watchbp@microlife.ch www.watchbp.com Asia Microlife Corporation 9F., No.431, Ruiguang Rd., Neihu Dist., Taipei City 114, Taiwan (R.O.C.) Tel. +886 2 8797 1288 Fax +886 2 8797 1283 Email: watchbp@microlife.com.tw www.watchbp.com North / Central / South America Microlife USA, Inc. 1617 Gulf to Bay Blvd 2nd Floor, Suite A Clearwater, FL 33755, USA Tel.
